Product Overview
The GE IC660BBD101 is a low-leakage discrete I/O block in the Genius I/O series with eight (8) configurable circuits sharing one group. Each circuit can be individually configured as a tristate input, non-tristate input, or output at a nominal 115 VAC. The low-leakage input circuitry ensures accurate detection with solid-state and two-wire field devices, making it a standard interface for Series 90-30 and Series 90-70 Genius bus architectures.
Technical Specs
- Circuits: 8, one group of 8, configurable per circuit
- Nominal Voltage: 115 VAC
- Operating Range: 93-132 VAC, 47-63 Hz
- Input Processing Time: 2 ms plus configurable filter
- Filter Time: 10-100 ms selectable in 10 ms increments
- Output Current: 2 A steady-state per circuit; 25 A peak inrush for 2 cycles
- Total Block Output: 15 A @ 35°C, 7.5 A @ 60°C
- Block-to-Block Isolation: 1500 V for one minute
- Electronic Protection: Output shutdown within 5 ms on overcurrent; channels restorable by CPU or hand-held monitor command
- Power Supply Dropout: 1 cycle (16.7 ms @ 60 Hz)
- Heat Dissipation: 16 W with 8 inputs active, 43.5 W with all outputs active
- Dimensions: 8.83 x 3.34 x 3.91 in (22.44 x 8.48 x 9.93 cm); weight 4 lbs (1.8 kg)
- Operating Temperature: 0°C to +60°C; storage -40°C to +100°C
Key Features
- Low-leakage inputs: Input design minimizes leakage current for dependable operation with solid-state and proximity-switch devices.
- Per-circuit configuration: Each circuit is independently set as input or output, reducing spare part variety.
- Comprehensive diagnostics: Detects open wire, short circuit, overload, failed switch, no-load, and overtemperature conditions.
- Electronic fusing: Outputs are protected by electronic trip circuits that shut down within 5 ms when current exceeds 30 A at turn-on or 20 A after 2 cycles.
- Genius protocol: Functions as a stand-alone remote I/O device on the Genius bus without a separate block power supply.
- Clear status indication: Unit OK and I/O Enabled LEDs plus a dedicated LED for every circuit.
FAQ
- Q: How many circuits does the IC660BBD101 provide? A: Eight identical circuits in one group of eight, each configurable as an input or output.
- Q: What is the output rating? A: 2 A steady-state per circuit, with a total block output of 15 A at 35°C or 7.5 A at 60°C.
- Q: Which devices can be connected to the inputs? A: The low-leakage input circuits accept contact closures, 2-wire, and 3-wire proximity switches rated for 115 VAC.
- Q: Does it need a separate power supply? A: No. Control power is derived from the 115 VAC I/O voltage wired to the block terminals.
Installation Guide
- Isolate all I/O power sources and confirm the panel mounting position allows the required wiring clearance.
- Set the Genius bus address and baud rate on the block configuration switches.
- Wire field devices to the terminal assembly using 22-12 AWG copper conductors and torque terminals to specification.
- Apply the 115 VAC I/O power and connect the chassis ground terminal.
- Energize the block, verify Unit OK and I/O Enabled LEDs, and test each circuit including filter time settings via the hand-held monitor.
Selection Tips
- Choose the IC660BBD101 for 115 VAC low-leakage applications; for DC-powered discrete I/O select the IC660BBD023 (24 VDC sink).
- Verify total output load stays within the 15 A / 7.5 A block limits at the expected ambient temperature.
- For isolated signal groups, consider the IC660BBS103 instead.
- Confirm compatibility with the hand-held monitor model in use (HHM500 series).
Product Condition
Factory New: New, current-production products sourced directly from the manufacturer.
New in Sealed Package: Unused products supplied in their original, factory-sealed packaging.
New in Original Package: Unused products supplied in original manufacturer packaging that was not factory-sealed.
Warranty
Products are covered by a 12-month warranty unless otherwise specified in the quotation or product listing. If a product has a quality issue, it can be exchanged within 12 months or refunded in full in cash. Contact our sales team with your order details if you require warranty assistance.
Shipping Information
In-Stock Items: Same-day dispatch is available for most in-stock orders with cleared payment received before 2:00 PM (UTC+8).
Indent Items: Typical lead time is 1–3 weeks, depending on availability and product scarcity.
Customs & Documentation
International shipments are prepared with a commercial invoice, packing list and available supporting documents. Consignee details, declared value and shipping terms are confirmed before dispatch. Tracking information is provided after shipment.
Payment
Payment is accepted by bank wire transfer only, in USD, EUR, GBP or RMB/CNY. Credit cards and credit terms are not accepted. Cleared payment is required before dispatch unless otherwise agreed in writing.
30-Day Returns
We accept return requests within 30 days of delivery for international orders, subject to our return policy.
To qualify, products must be unused, in their original condition and packaging, with proof of purchase.
How to Request a Return
Contact our sales team with your order number, product details and reason for return. Please obtain return authorization and the correct return address before shipping any items back. Returns are made by mail. Return shipping is not free. It is charged at the actual international air-freight cost based on weight and volume.
Refunds are processed according to our published return and refund policy after the returned items have been reviewed.
Quality issues
Quality issues are covered by the 12-month warranty. Within 12 months, a quality issue can be exchanged or refunded in full in cash.
For full terms, please refer to our Refund Policy.
Frequently ask questions
Click Request a Quote on the product page and provide the part number, quantity, and destination country. Our sales team will reply with availability, pricing, and estimated delivery time.
We supply original industrial automation parts in different new-product conditions, including Factory New, New in Sealed Package, and New in Original Package. The condition of each item is specified in...
Yes. We source obsolete and hard-to-find PLC, DCS, and industrial control components. Send us the exact part number and required quantity so we can check availability.
Most in-stock orders with cleared payment received before 2:00 PM (UTC+8) qualify for same-day dispatch. Indent items typically require 1–3 weeks, depending on availability.
Yes. We ship industrial automation spare parts worldwide. Shipping costs and transit times depend on the destination, package weight, dimensions, and local import requirements.
We commonly ship through DHL, FedEx, UPS, and other international courier services. The carrier is selected based on the destination, shipment size, and delivery requirements.
We accept bank wire transfers in USD, EUR, GBP, and RMB/CNY. Full cleared payment is required before shipment unless otherwise agreed in the written quotation.
Products generally include a 12-month warranty unless otherwise stated in the quotation or product listing. Contact our team with your order details for warranty assistance.
Eligible products may be returned within 30 days of delivery, subject to our return policy. Contact our team for return authorization and instructions before sending any items back.
Yes. Tracking details are provided after dispatch. Commercial invoices, packing lists, and available supporting documents are prepared for international shipments.