FIP Remote I/O Scanner IC693BEM330 GE Series 90-30

Product Overview

GE IC693BEM330 is a FIP Remote I/O Scanner module for Series 90-30 systems. Installed in slot 1 of a remote baseplate, it interfaces Series 90-30 I/O modules to a FIP bus, supporting multiple I/O modules across connected baseplates.

Technical Specs

• Type: FIP I/O Scanner
• Installation: Slot 1 of remote baseplate
• I/O capacity: Up to 19 I/O modules class (with expansion)
• Ports: Two 9-pin D-connectors
• LEDs: CD1, TEN1, CD2, TEN2
• System: GE Fanuc Series 90-30

Key Features

• Interfaces remote Series 90-30 I/O to FIP bus
• Supports multi-baseplate remote I/O configurations
• Status LEDs for communication diagnostics
• Intelligent scanner for discrete and analog I/O

FAQ

• Function? FIP remote I/O scanner.
• Slot? Slot 1 of remote base.
• System? Series 90-30.

Installation Guide

1. Install the module in slot 1 of the remote baseplate.
2. Connect the FIP bus cables to the 9-pin connectors.
3. Install I/O modules and expansion cables as required.
4. Configure the scanner and I/O mapping in the software.
5. Power up and verify communication status LEDs.

Selection Tips

• Required for FIP-based remote I/O on Series 90-30.
• Confirm FIP network and baseplate compatibility.
• Critical module for remote Series 90-30 I/O islands.