
Product Overview
The EPRO PR6423/010-120 is an 8 mm non-contact eddy current displacement probe for industrial machinery monitoring. It measures the distance between the sensor tip and an electrically conductive target. When connected to a compatible EPRO signal converter, it supports shaft vibration, radial and axial displacement, eccentricity and position monitoring.
Technical Specs
- Manufacturer: EPRO / Emerson
- Sensor family: PR6423
- Probe tip diameter: 8 mm
- Mounting thread: M10 x 1
- Armored cable: No
- Probe sleeve length: 25 mm
- Adapter plug: Not fitted
- Total cable length: 6 m
- Cable termination: LEMO connector
- Measuring principle: Eddy current, non-contact
- Static measuring range: ±1.0 mm
- Dynamic measuring range: 50 to 500 µm peak-to-peak
- Nominal sensitivity: 8 V/mm
- Nominal center gap: 1.5 mm
- Measuring target: Electrically conductive steel
- Probe operating temperature: -35 to +180°C
- Probe protection class: IP66
Key Features
- 8 mm sensing tip for contactless displacement measurement.
- M10 x 1 mounting thread and 25 mm sleeve length.
- 6 m cable with LEMO termination.
- Supports static and dynamic shaft measurement.
- Designed for use with compatible EPRO signal converters.
- Suitable for machinery condition monitoring and protection systems.
FAQ
What does the PR6423/010-120 measure?
It measures the distance to conductive targets and supports shaft vibration and displacement monitoring.
What is the cable length?
The /010-120 ordering code specifies a 6 m cable.
Is a signal converter included?
No. The model identifies the probe only. A compatible signal converter is required for a complete measuring chain.
Installation Guide
- Check the M10 x 1 mounting thread and 25 mm sleeve length.
- Install the probe at the specified measurement point.
- Route the 6 m cable with suitable mechanical protection.
- Connect the LEMO plug to the compatible converter input.
- Adjust the initial air gap according to the measuring-chain calibration.
- Verify the output signal and mechanical clearance before operation.
Selection Tips
Confirm the no-armored-cable configuration, 6 m cable length and LEMO termination. Check the complete model code and ensure compatibility with the installed converter and calibration.
Product Condition
Factory New: New, current-production products sourced directly from the manufacturer.
New in Sealed Package: Unused products supplied in their original, factory-sealed packaging.
New in Original Package: Unused products supplied in original manufacturer packaging that was not factory-sealed.
Warranty
Products are covered by a 12-month warranty unless otherwise specified in the quotation or product listing. If a product has a quality issue, it can be exchanged within 12 months or refunded in full in cash. Contact our sales team with your order details if you require warranty assistance.
Shipping Information
In-Stock Items: Same-day dispatch is available for most in-stock orders with cleared payment received before 2:00 PM (UTC+8).
Indent Items: Typical lead time is 1–3 weeks, depending on availability and product scarcity.
Customs & Documentation
International shipments are prepared with a commercial invoice, packing list and available supporting documents. Consignee details, declared value and shipping terms are confirmed before dispatch. Tracking information is provided after shipment.
Payment
Payment is accepted by bank wire transfer only, in USD, EUR, GBP or RMB/CNY. Credit cards and credit terms are not accepted. Cleared payment is required before dispatch unless otherwise agreed in writing.
30-Day Returns
We accept return requests within 30 days of delivery for international orders, subject to our return policy.
To qualify, products must be unused, in their original condition and packaging, with proof of purchase.
How to Request a Return
Contact our sales team with your order number, product details and reason for return. Please obtain return authorization and the correct return address before shipping any items back. Returns are made by mail. Return shipping is not free. It is charged at the actual international air-freight cost based on weight and volume.
Refunds are processed according to our published return and refund policy after the returned items have been reviewed.
Quality issues
Quality issues are covered by the 12-month warranty. Within 12 months, a quality issue can be exchanged or refunded in full in cash.
For full terms, please refer to our Refund Policy.
Frequently ask questions
Click Request a Quote on the product page and provide the part number, quantity, and destination country. Our sales team will reply with availability, pricing, and estimated delivery time.
We supply original industrial automation parts in different new-product conditions, including Factory New, New in Sealed Package, and New in Original Package. The condition of each item is specified in...
Yes. We source obsolete and hard-to-find PLC, DCS, and industrial control components. Send us the exact part number and required quantity so we can check availability.
Most in-stock orders with cleared payment received before 2:00 PM (UTC+8) qualify for same-day dispatch. Indent items typically require 1–3 weeks, depending on availability.
Yes. We ship industrial automation spare parts worldwide. Shipping costs and transit times depend on the destination, package weight, dimensions, and local import requirements.
We commonly ship through DHL, FedEx, UPS, and other international courier services. The carrier is selected based on the destination, shipment size, and delivery requirements.
We accept bank wire transfers in USD, EUR, GBP, and RMB/CNY. Full cleared payment is required before shipment unless otherwise agreed in the written quotation.
Products generally include a 12-month warranty unless otherwise stated in the quotation or product listing. Contact our team with your order details for warranty assistance.
Eligible products may be returned within 30 days of delivery, subject to our return policy. Contact our team for return authorization and instructions before sending any items back.
Yes. Tracking details are provided after dispatch. Commercial invoices, packing lists, and available supporting documents are prepared for international shipments.