Bus Receiver Module IC697BEM711N GE Series 90-70

Product Overview

GE Fanuc IC697BEM711N is a Bus Receiver Module for Series 90-70 systems. It enables expansion from the main rack to additional I/O racks (up to seven) with a maximum interconnecting cable length of approximately 15 m, and must be installed in slot 1 of the expansion rack.

Technical Specs

• Type: Bus Receiver Module
• Expansion capacity: Up to 7 additional racks
• Max cable length: Approx. 15 m (50 ft)
• Installation: Slot 1 of expansion rack
• Status LEDs: Module, termination, bus expansion
• Features: Hold last state support, system fault isolation
• System: GE Fanuc Series 90-70

Key Features

• Enables multi-rack expansion
• Supports hold-last-state on communication loss
• Software configurable, no DIP switches
• Status LEDs for quick diagnostics

FAQ

• Function? Bus receiver for rack expansion.
• Slot? Must be slot 1.
• Max racks? Up to 7 expansion racks.

Installation Guide

1. Install the module in slot 1 of the expansion rack.
2. Connect the expansion cable to the upstream rack.
3. Install the I/O bus terminator on the last rack.
4. Configure the rack in the PLC software.
5. Power up and verify LED status and communication.

Selection Tips

• Required for every Series 90-70 expansion rack.
• Confirm terminator and cable length limits.
• Critical spare for multi-rack Series 90-70 systems.