GE
187 na lageru
GE IS200STCIH2A（IS230SNCIH2A) - DINRL CNTIP
GE IS200STCIH2A（IS230SNCIH2A) - DINRL CNTIP
Manufacturer: GE
Product No.: IS200STCIH2A（IS230SNCIH2A)
Product Type: DINRL CNTIP
Product Origin: USA
Payment: T/T
Weight: 400g
Shipping port: Xiamen
Warranty: 12 months
Descroption
IS200STCIH2A is a Simplex Contact Input terminal board developed by GE under Mark VI series. The Simplex Contact Input terminal board is a small contact input terminal board designed for DIN-rail or flat mounting. The board accepts 24 contact inputs with nominal 24, 48, and 125 V dc excitation from an external source. The contact inputs have noise suppression to protect against surge and high-frequency noise. The PAIC I/O Pack is compatible with the module. The I/O pack plugs into the D-type connector and communicates with the controller via Ethernet. Only simplex systems are supported.
SPECIFICATIONS
| Item | Details |
|---|---|
| Part No. | IS200STCIH2A / IS230SNCIH2A |
| Product Name | Simplex Contact Input Terminal Board (DINRL CNTIP) |
| Manufacturer | General Electric (GE) |
| Country of Manufacture | United States (USA) |
| Product Type | Terminal Board |
| Series | Mark VI |
| Mounting Type | DIN-rail or flat-mount |
| Supported I/O Pack | PAIC I/O Pack |
| System Compatibility | Simplex systems only |
| Communication | Ethernet (via PAIC I/O pack through D-type connector) |
| Input Channels | 24 contact input channels |
Technical Parameters
| Parameter | Details |
|---|---|
| Input Voltage Levels (Nominal) | 24 VDC, 48 VDC, 125 VDC (externally supplied excitation) |
| Input Type | Dry contact inputs |
| Input Thresholds | “ON” detection typically above 16–18 V (varies by excitation voltage) |
| Isolation | Optical isolation per input channel (channel-to-channel and channel-to-ground) |
| Noise Suppression | Built-in surge and high-frequency noise suppression circuitry |
| Input Debounce / Filtering | Hardware filtering to eliminate contact bounce and transient spikes |
| Connector Type | 24-point screw-terminal block + D-type connector for I/O pack |
| Operating Voltage Range | ±20% of nominal excitation voltage |
| Power Consumption | Low (<2 W board-level typical, excluding excitation supply) |
| Operating Temperature | –30°C to +65°C (board level typical for Mark VI I/O) |
| Storage Temperature | –40°C to +85°C |
| Humidity | 5–95% non-condensing |
| Insulation Resistance | >100 MΩ at 500 VDC |
| Surge Protection | Transient suppression per IEC/IEEE requirements for turbine control |
| Dimensions | Approx. 180 mm × 130 mm (board size for DIN-rail Mark VI terminal boards) |
| Mounting Hardware | DIN-rail clips or panel-mount screw slots |
| Weight | 0.40 kg |
Tags:
