{"product_id":"epro-pr6423-010-140-con011-eddy-current-sensor-set","title":"EPRO PR6423\/010-140+CON011 Eddy Current Sensor Set","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\u003cp\u003eThe EPRO PR6423\/010-140+CON011 is an eddy current measuring chain combining an 8 mm PR6423 displacement probe with a CON011 signal converter. The probe measures the distance to conductive machine targets without contact, while the converter conditions the sensor signal for machinery monitoring equipment. This combination is designed for shaft vibration, radial and axial displacement, eccentricity and position measurement in critical rotating machinery.\u003c\/p\u003e\u003ch3\u003eTechnical Specs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: EPRO \/ Emerson\u003c\/li\u003e\n\u003cli\u003eProbe model: PR6423\/010-140\u003c\/li\u003e\n\u003cli\u003eConverter model: CON011\u003c\/li\u003e\n\u003cli\u003eProbe tip diameter: 8 mm\u003c\/li\u003e\n\u003cli\u003eMounting thread: M10 x 1\u003c\/li\u003e\n\u003cli\u003eArmored cable: No\u003c\/li\u003e\n\u003cli\u003eProbe sleeve length: 25 mm\u003c\/li\u003e\n\u003cli\u003eAdapter plug: Not fitted\u003c\/li\u003e\n\u003cli\u003eTotal cable length: 10 m\u003c\/li\u003e\n\u003cli\u003eCable termination: LEMO connector\u003c\/li\u003e\n\u003cli\u003eMeasuring principle: Eddy current, non-contact\u003c\/li\u003e\n\u003cli\u003eStatic measuring range: ±1.0 mm\u003c\/li\u003e\n\u003cli\u003eNominal sensitivity: 8 V\/mm\u003c\/li\u003e\n\u003cli\u003eNominal center gap: 1.5 mm\u003c\/li\u003e\n\u003cli\u003eMeasuring target: Electrically conductive steel\u003c\/li\u003e\n\u003cli\u003eCON011 frequency response: 0 to 20 kHz (-3 dB)\u003c\/li\u003e\n\u003cli\u003eCON011 rise time: Less than 15 µs\u003c\/li\u003e\n\u003cli\u003eCON011 operating temperature: -30 to +100°C\u003c\/li\u003e\n\u003cli\u003eCON011 protection class: IP65\u003c\/li\u003e\n\u003cli\u003eCON011 weight: Approximately 600 g\u003c\/li\u003e\n\u003cli\u003eCON011 supply voltage: -23 to -32 VDC or -21 to -32 VDC, depending on output range\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eComplete PR6423 probe and CON011 converter combination.\u003c\/li\u003e\n\u003cli\u003e8 mm non-contact eddy current sensing technology.\u003c\/li\u003e\n\u003cli\u003eM10 x 1 probe thread and 25 mm sleeve.\u003c\/li\u003e\n\u003cli\u003e10 m LEMO-terminated probe cable.\u003c\/li\u003e\n\u003cli\u003eCON011 panel-mount converter with IP65 protection.\u003c\/li\u003e\n\u003cli\u003eSuitable for shaft vibration and displacement monitoring.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat components are included?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe model designation identifies the PR6423\/010-140 probe and CON011 signal converter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the converter protection rating?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe CON011 converter has an IP65 protection rating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the probe connect to the converter through a LEMO plug?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eYes. The PR6423 probe uses a LEMO connection for CON011 and CON021 converter inputs.\u003c\/p\u003e\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eVerify the PR6423\/010-140 probe and CON011 converter labels.\u003c\/li\u003e\n\u003cli\u003eMount the probe using the M10 x 1 thread and specified installation clearance.\u003c\/li\u003e\n\u003cli\u003eRoute the 10 m cable and connect its LEMO plug to the CON011 sensor socket.\u003c\/li\u003e\n\u003cli\u003eWire the converter supply and signal output terminals according to the wiring diagram.\u003c\/li\u003e\n\u003cli\u003eSet the probe-to-target gap using the calibrated measuring-chain output.\u003c\/li\u003e\n\u003cli\u003eVerify the signal response and converter operation before commissioning.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eSelection Tips\u003c\/h3\u003e\u003cp\u003eConfirm the complete probe and converter combination. Check the 10 m cable, LEMO connection, M10 x 1 mounting thread, converter output range and existing monitoring-system requirements before replacement.\u003c\/p\u003e","brand":"Emerson","offers":[{"title":"Default Title","offer_id":46162373476663,"sku":"PR6423\/010-140+CON011","price":230.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/8343\/6343\/products\/e520406ece11de22a48cb26cfe714132.png?v=1691131491","url":"https:\/\/www.controltech-supply.com\/products\/epro-pr6423-010-140-con011-eddy-current-sensor-set","provider":"Controlnex Supply Limited","version":"1.0","type":"link"}