{"product_id":"epro-pr6423-010-100-con021-eddy-current-measuring-set","title":"EPRO PR6423\/010-100+CON021 Eddy Current Measuring Set","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\u003cp\u003eThe EPRO PR6423\/010-100+CON021 is an eddy current displacement measuring chain consisting of an 8 mm PR6423 probe and a CON021 signal converter. The probe provides non-contact measurement of conductive machine targets, while the converter conditions the sensor signal for connection to machinery monitoring equipment. It is designed for shaft vibration, radial and axial displacement, eccentricity and position monitoring.\u003c\/p\u003e\u003ch3\u003eTechnical Specs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: EPRO \/ Emerson\u003c\/li\u003e\n\u003cli\u003eProbe model: PR6423\/010-100\u003c\/li\u003e\n\u003cli\u003eConverter model: CON021\u003c\/li\u003e\n\u003cli\u003eProbe tip diameter: 8 mm\u003c\/li\u003e\n\u003cli\u003eMounting thread: M10 x 1\u003c\/li\u003e\n\u003cli\u003eArmored cable: No\u003c\/li\u003e\n\u003cli\u003eProbe sleeve length: 25 mm\u003c\/li\u003e\n\u003cli\u003eAdapter plug: Not fitted\u003c\/li\u003e\n\u003cli\u003eTotal cable length: 4 m\u003c\/li\u003e\n\u003cli\u003eCable termination: LEMO connector\u003c\/li\u003e\n\u003cli\u003eMeasuring principle: Eddy current, non-contact\u003c\/li\u003e\n\u003cli\u003eStatic measuring range: ±1.0 mm\u003c\/li\u003e\n\u003cli\u003eNominal sensitivity: 8 V\/mm\u003c\/li\u003e\n\u003cli\u003eNominal center gap: 1.5 mm\u003c\/li\u003e\n\u003cli\u003eMeasuring target: Electrically conductive steel\u003c\/li\u003e\n\u003cli\u003eCON021 frequency response: 0 to 20 kHz (-3 dB)\u003c\/li\u003e\n\u003cli\u003eCON021 rise time: Less than 15 µs\u003c\/li\u003e\n\u003cli\u003eCON021 operating temperature: -30 to +100°C\u003c\/li\u003e\n\u003cli\u003eCON021 protection class: IP20\u003c\/li\u003e\n\u003cli\u003eCON021 weight: Approximately 120 g\u003c\/li\u003e\n\u003cli\u003eCON021 supply voltage: -23 to -32 VDC or -21 to -32 VDC, depending on output range\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eComplete PR6423 probe and CON021 converter measuring chain.\u003c\/li\u003e\n\u003cli\u003e8 mm non-contact eddy current sensing technology.\u003c\/li\u003e\n\u003cli\u003eM10 x 1 mounting thread with 25 mm sleeve.\u003c\/li\u003e\n\u003cli\u003e4 m LEMO-terminated probe cable.\u003c\/li\u003e\n\u003cli\u003eCON021 converter supports high-frequency dynamic measurement.\u003c\/li\u003e\n\u003cli\u003eSuitable for critical rotating machinery monitoring.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat components are included in this model?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe model designation identifies the PR6423\/010-100 probe and CON021 signal converter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the converter frequency response?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe CON021 has a frequency response of 0 to 20 kHz at -3 dB.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the measuring chain monitor shaft vibration?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eYes. It supports non-contact shaft vibration and displacement measurement when installed and calibrated correctly.\u003c\/p\u003e\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eVerify the PR6423\/010-100 probe and CON021 converter model numbers.\u003c\/li\u003e\n\u003cli\u003eMount the probe using the M10 x 1 thread and specified clearance.\u003c\/li\u003e\n\u003cli\u003eRoute the 4 m cable and connect its LEMO plug to the CON021 sensor input.\u003c\/li\u003e\n\u003cli\u003eWire the converter supply and output terminals according to the wiring diagram.\u003c\/li\u003e\n\u003cli\u003eAdjust the initial air gap using the measuring-chain calibration procedure.\u003c\/li\u003e\n\u003cli\u003eVerify signal output and monitoring-system response before commissioning.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eSelection Tips\u003c\/h3\u003e\u003cp\u003eCheck the complete probe and converter combination, including the 4 m cable, LEMO termination and M10 x 1 mounting arrangement. Match the converter output range and calibration with the existing monitoring system.\u003c\/p\u003e","brand":"Emerson","offers":[{"title":"Default Title","offer_id":46162376884535,"sku":"PR6423\/010-100+CON021","price":200.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/8343\/6343\/products\/780e4af5399cf56152ef5ea0ac7a362a.jpg?v=1691131693","url":"https:\/\/www.controltech-supply.com\/products\/epro-pr6423-010-100-con021-eddy-current-measuring-set","provider":"Controlnex Supply Limited","version":"1.0","type":"link"}