{"product_id":"electronic-assembly-16-input-115vac-ge-ic660ebd110p","title":"Electronic Assembly 16-Input 115VAC GE IC660EBD110P","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe GE IC660EBD110P is the \u003cstrong\u003eelectronic assembly of the IC660BBD110 sixteen-point, 93-132 VAC discrete input module\u003c\/strong\u003e. It hosts the voltage sensing circuits, resistor\/capacitor networks, and input isolation circuitry, pairing with the IC660TBD110 terminal base to form the complete input block. The assembly is designed for GE Fanuc Genius I\/O distributed architectures requiring robust, isolated AC input monitoring.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Circuits:\u003c\/strong\u003e 16, input only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal Input Voltage:\u003c\/strong\u003e 115 VAC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Voltage Range:\u003c\/strong\u003e 93-132 VAC, 47-63 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Resistance:\u003c\/strong\u003e 11.6 kΩ; preload current 9.9 mA at 115 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput-to-Ground Isolation:\u003c\/strong\u003e 1500 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeat Dissipation:\u003c\/strong\u003e 28 W max with all 16 inputs ON at full current\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRequired Power:\u003c\/strong\u003e 80 mA max device current plus 200 mA max input circuit current\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Board Rating:\u003c\/strong\u003e 5 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Terminal Base:\u003c\/strong\u003e IC660TBD110\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 8.83 x 3.50 x 3.94 in (22.44 x 8.89 x 10.00 cm); weight 4 lbs (1.8 kg)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature:\u003c\/strong\u003e 0°C to +60°C; storage -40°C to +100°C; humidity 5-95% non-condensing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eResistive input circuitry:\u003c\/strong\u003e The resistive load is sufficient to activate 2-wire proximity switch devices directly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh isolation rating:\u003c\/strong\u003e 1500 V input-to-ground and bus isolation enhances safety and noise immunity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring fault detection:\u003c\/strong\u003e Detects input open and shorted wire conditions, reported to the CPU and indicated locally via the Unit OK LED.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePer-circuit indication:\u003c\/strong\u003e Each of the 16 circuits has a dedicated LED showing the logic-side input state.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModular architecture:\u003c\/strong\u003e Electronics assembly and terminal base separate, allowing field wiring to remain intact during electronics replacement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with 2-wire and 3-wire devices:\u003c\/strong\u003e Accepts contact closures from limit switches, pushbuttons, and proximity switches.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What does the IC660EBD110P form when assembled?\u003c\/strong\u003e A: Paired with the IC660TBD110 terminal base, it forms the complete IC660BBD110 16-point 115 VAC discrete input module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Can the circuits be used as outputs?\u003c\/strong\u003e A: No. All 16 circuits are input-only.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Where does the block draw control power?\u003c\/strong\u003e A: Control power is drawn directly from the 115 VAC line that powers the inputs, so no additional power supply is required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: How are wiring faults reported?\u003c\/strong\u003e A: Open and shorted wire conditions are reported to the CPU and indicated via the local Unit OK LED.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eDe-energize the 115 VAC input power and verify zero voltage at the terminal base.\u003c\/li\u003e\n\u003cli\u003eConfirm the terminal base IC660TBD110 is mounted and field wiring is complete and labeled.\u003c\/li\u003e\n\u003cli\u003eAlign the IC660EBD110P electronic assembly with the terminal base connector and press evenly until fully seated.\u003c\/li\u003e\n\u003cli\u003eBond the block chassis to the panel ground.\u003c\/li\u003e\n\u003cli\u003eRe-energize and verify the Unit OK LED and each input circuit LED reflect the field device states; test open\/shorted wire diagnostics via the hand-held monitor.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eSelection Tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOrder the IC660TBD110 terminal base together with the electronic assembly to form a complete IC660BBD110 input block.\u003c\/li\u003e\n\u003cli\u003eConfirm field devices are rated for 93-132 VAC operation and that the 9.9 mA preload current suits connected 2-wire sensors.\u003c\/li\u003e\n\u003cli\u003eFor 24 VDC input applications, select the IC660BBD023 block family instead.\u003c\/li\u003e\n\u003cli\u003eKeep a spare terminal base on hand so wiring can be pre-terminated before a shutdown window.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GE","offers":[{"title":"Default Title","offer_id":53293014057271,"sku":"IC660EBD110P","price":179.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/8343\/6343\/files\/IC660EBD110P1_6dc7663f-1869-42e8-9f5b-225dcf99c9be.jpg?v=1791871165","url":"https:\/\/www.controltech-supply.com\/products\/electronic-assembly-16-input-115vac-ge-ic660ebd110p","provider":"ControlTech Supply Limited","version":"1.0","type":"link"}